Trailed VOLTO tedders set new standards.

In the VOLTO 1500 T/TS and 1300 T/TS, the slender central frame with Y-shaped axle carrier and independent wheel suspension offers several advantages: the long swing arm in relation to the rotor frame achieves good ground clearance during lifting. Yet the rotor frame's centre of gravity remains close to the axle for smooth handling and high stability at the headland – even on uneven ground. The wide axle with large tyres reduces rolling movements and ensures safe road travel. Compact transport dimensions additionally improve visibility and make it easier to manoeuvre in confined spaces.

The PERMALINK HD drivetrain is the nerve centre of the trailed VOLTO models. The reinforced finger clutch and larger sized folding points ensure continuous and reliably power transmission – even under peak loading.

An increase in rotational speed inside of 50% significantly reduces the torque applied to the components. This reduces the load on shafts, couplings and the gearbox and greatly increases the service life of all drive components.

The system is further enhanced by a hermetically sealed, oil-lubricated rotor gearbox – for low maintenance and long-term reliability.

The advantage:

• Reliable power transmission
• Reduced load on components
• Long service life
• Low maintenance outlay

All trailed VOLTO models feature a stable headland position with high ground clearance as standard – with no additional hydraulic ram. This reduces weight and complexity. At the same time, the machine glides smoothly and gently through the crop even on uneven ground. What has already proved its worth in the large 1500 and 1300 models is now a standard feature of the 1100 to 800 series.

• New transport chassis for maximum stability
• Reinforced folding points in the 1500 T/TS and 1300 T/TS models
• PERMALINK HD drive with larger finger clutch
• Oil-lubricated, sealed rotor gearbox
• Stable headland position as standard
• Robust rotor wheel connection with up to three spreading angles

The TS versions of the VOLTO 1500 and VOLTO 1300 are equipped with a self-steering chassis. This enables tight bends and headland manoeuvres to be negotiated without lifting the rotors. It also prevents distortion between the chassis and rotor frames, as well as damage to the sward caused by the rotor wheels. When the rotor frame is raised, the chassis wheels automatically align in the direction of travel to ensure stable handling.

The new high-performance tedders also rely on world-renowned MAX-SPREAD technology – featuring spreader arms angled 29.3° to the rear. These ensure high raking performance, a clean rake and uniform spread pattern – even under difficult conditions in damp or heavy crops.

The benefits of MAX SPREAD at a glance:

• High raking performance
• Gentle forage handling
• Uniform spread pattern
• Higher throughput
• Clean rake

In the VOLTO 1500 T/TS and 1300 T/TS models, the chassis wheels also act as guide wheels. They reliably guide the machine over the ground, keeping the rotors in a steady, stable position across the entire working width. At the same time, they effectively prevent the tines digging in to the sward – even on uneven ground or changing ground conditions. This protects the crop in the long-term and reduces forage soiling.

Guide wheels are optionally available for the VOLTO 1100 T and 900 T. They support precise rotor guidance and a uniform working depth. This ensures clean and low-loss forage pick-up – while at the same time relieving pressure on both machine and crop.

• Small rotor diameter
• Precise ground contour-following
• Up to three spreading angles
• Self-steeering TS models
• Optimised guide wheel geometry

KENNFIXX hydraulic couplers make it easy to identify the correct function and ensure rapid connection. They are controlled directly via the tractor spool valves – simple, straightforward and without complex additional controls.

Expertise at a glance:

• KENNFIXX hydraulic connectors
• Ingenious folding mechanism
• Safe transport position
• High stability on the road
• Convenient connection
• Simple, intuitive operation

The trailed VOLTO 1500 T, 1300 T, 1100 T, 900 T and 800 TH models deliver an impressive performance on the road as well as in the field thanks to an overall concept systematically designed with safety in mind. The stable and intelligent folding mechanism brings the machine into a compact, safe transport position and ensures balanced weight distribution. This concept is further enhanced by LED lighting as standard for optimum visibility.

Trailed VOLTO tedders combine decades of forage harvesting experience with a systematic focus on practicality. Robust engineering, simple operation and well-designed functions together ensure consistently high work quality – even under tough conditions.